Knowledgebase:
What video formats and codecs does the BrightSign support
Posted: , Last Modified: 22 April 2015 11:22 AM

The following describes the requirements for video to play successfully on the BrightSign.


XD230, XD1030, XD1230, HD120, HD220, HD1020, HD110, HD210, HD410, HD810, and HD1010:

  • MPEG-2, MPEG-1, H.264 (MPEG-4, Part 10)
  • Supported extensions: .TS, .MPG, .VOB, .MOV, .MP4

Note: .MOV files with compressed "atoms" (i.e. metadata) are not currently supported.

  • Additionally Supported .WMV, exported from Powerpoint (.WMV, video only)
    • WMA audio is not supported
  • MPEG-2 Program and Tranport streams
  • H.264 Transport and Program Streams (program streams (mov & mp4) require firmware 3.5)
    • AAC audio supported with h.264 files
    • Main or High Profile up to level 4.1 on HD series and up to level 4.2 on XD series
    • CBR audio (VBR is not supported)
  • MPEG-1 System Streams only (elementary streams are not supported)
  • Maximum bit rate recommended is 25Mbps; see Video Quality Technote for details on higher bit rate support
  • Maximum video resolution supported is 1920x1080p (progressive)

 

HD600:

  • MPEG-1 or MPEG-2 Standard video files
  • Supported extensions .MPG and .VOB
  • Must be a Program Stream (System Stream for MPEG-1)
  • Must contain an audio layer at a 48Khz sample rate, even if it's just silence.
  • Maximum bit rate supported is 9Mbps
  • Maximum video resolution supported is 720x480



HD2000:

  • MPEG-1 or MPEG-2 HD or Standard video files
  • Supported extensions .MPG and .VOB
  • Must be a Program Stream (System Stream for MPEG-1)
  • Maximum bit rate supported is 25Mbps
  • Maximum video resolution supported is 1920x1080i (interlaced)
(0 vote(s))
Helpful
Not helpful